03/12/2013
Z.R. Tool Inc. (905) 836-0590 - Strapping Machinery, Tools & Parts
www.zrtool.com/html/MS25Manual.htm
1/8
MS25 OPERATION MANUAL
SAFETY INSTRUCTIONS
SPECIFICATIONS
OPERATING INSTRUCTIONS
MAINTENANCE
ADJUSTMENTS
REPLACEMENT OF PARTS
MS25 DIAGRAM
MS25 PARTS LIST
SAFETY INSTRUCTIONS
Please read these instructions carefully. Failure to follow these instructions could result in
severe injury.
1. Before using the tool read the entire operation manual thoroughly.
2. Always wear safety glasses and face protection when operating the tool.
3. Always wear protective gloves when handling strapping.
4. Always use only
replacement parts from an authorized dealer.
These tools are designed for use with high tensile strapping and all parts are
manufactured or treated for these extreme conditions. Performance of your tool will be
affected if any other parts are used, which may cause injury.
SPECIFICATIONS
Model Number
Strap Width
Strap Thickness
MS25-1
1/2" (13 mm)
.020" - .025" (0.5 mm - 0.635 mm)
MS25-2
5/8" (16 mm)
.020" - .025" (0.5 mm - 0.635 mm)
MS25-3
3/4" (19 mm)
.020" - .025" (0.5 mm - 0.635 mm)
*.015" - .019 (038 mm - 0.48 mm)
requires knife ZR-0070
This tool is not to be used with material above .025" thickness.
Weight:
9.4 lbs
(4.25 kg)
Base Length:
4.5"
(115 mm)
Base Width:
2.4"
(60 mm)
Height:
4.2"
(105 mm)
STRAPPING QUALITIES
Designed for use with regular duty strapping (107,000 PSI / 750 N/mm
2
) to high tensile
strapping (156,000 PSI / 1100 N/mm
2
).
OPERATING INSTRUCTIONS
A
Place strapping tightly around the
package and hold in place with left
hand.
Take tool with right hand and pull the
feedwheel lever towards the sealing
lever.
Insert both portions of the strap with
