03/12/2013
Z.R. Tool Inc. (905) 836-0590 - Strapping Machinery, Tools & Parts
www.zrtool.com/html/MS25Manual.htm
2/8
Insert both portions of the strap with
left hand into the sealing section.
Release the feedwheel lever and make
certain strapping is held by strap
guide.
B
Hold tool firmly with left hand on the
sealing lever.
With right hand move the tension lever
forward and backward until the desired
tension is obtained.
C
Place right hand firmly on the tension
lever for supporting the tool.
With left hand push the sealing lever
forward until it reaches the stop.
D
Move the sealing lever back to its
original position.
To release the tool, with right hand
pull the feedwheel lever towards the
sealing lever, pushing the lever to the
left away from the sealing section.
MAINTENANCE
Clean the sealing section regularly with compressed air to remove any dust and particles.
Lubricate daily with a thin grade of oil the die (position 16) and punch (position 26).
This will reduce friction and extend tool as well as part life.
