8
6. Attaching the Smokestack and Chimney Cap:
Using
Bolt(48)
through the holes of Smokestack(15) and the hole of
Smoke Stack Gasket(16), Align the hole of Grill body, attaching 6 5
18*2 0
Gasket(50) and 1/4-20 Hexagon Nut(52), then using wrench to tighten them, as shown.
1/4-20×
12mm
Φ . *Φ
.
mm
11
7
.
Attaching Heat Baffle:
Attaching t
he Heat Baffle(5) on the locating Brackets which is on the inside walls of
the Grill body, as shown.
12
8.Attaching The Grease Drain Pan:
Attaching the Grease Drain Pan (6) over the Heat Baffle (5) as per direction of below
Figure, so that the grease can flow into the Grease Drain Tube, as shown.
13
9.Attaching Cooking Grate and Warming Rack:
Attaching the Porcelain Cooking Grate (8) and Warming Rack (7) in the Chamber, As
shown
14
11
10
