Z-EDGE X3, User Manual

Page: 15 / 20

13
Note: To securely attach a mount please ensure you read the following instructions
below:
Attach adhesive mounts 72 hours before use (24 hours minimum) to ensure a strong ·
bond.
Adhesive mounts must be mounted on smooth surfaces to ensure a proper bond. ·
Apply adhesive mounts to clean surfaces only - wax, oil or dirt will weaken the bond. ·
Firmly press adhesive mounts into place and ensure full contact over the entire ·
surface.
Attach adhesive mounts in room temperature conditions. ·
Loop the circular ring of the Tether over the thumbscrew of the camera housing and ·
attach the other end to a secure anchor point. This will help prevent losing the
camera if it accidentally releases. To avoid injury do not use tether if attaching
camera to a helmet or other personal protective gear.
Mounting Accessories
· 2x Velcro Straps
2x Buckle Straps
·
4x Cable Ties ·
1x Tether ·
2x Replacement Adhesive Pads ·
1x Cleaning Cloth ·
1X Clip Mount ·