Z Corporation Z402C, User Manual

Page: 3 / 57

Z Corporation Z402C System User Manual
4 PRINTING THE PART ........................................................................................... 29
5 POST PROCESSING THE PART.............................................................................. 32
5.1 REMOVING THE FINISHED PART..................................................................... 32
5.2 DEPOWDERING THE PART............................................................................... 33
5.3 DRYING THE PART ............................................................................................ 33
5.4 INFILTRATING THE PART.................................................................................. 34
5.4.1 TO INFILTRATE THE PART USING RESIN: .............................................................34
6 ADVANCED USER FEATURES................................................................................ 35
6.1 ORIENTATION FOR SPEED............................................................................... 35
6.2 ORIENTATION FOR STRENGTH....................................................................... 35
6.3 ORIENTATION TO PREVENT WARPING .......................................................... 35
7 MAINTENANCE ......................................................................................................... 36
7.1 CHANGING THE COLOR PRINT HEAD ........................................................ 36
7.2 CHANGING MONOCHROME PRINT HEADS.................................................... 41
7.3 FLUSHING THE BINDER .................................................................................... 44
7.4 GREASING THE FAST AXIS .......................................................................... 45
7.5 CHANGING BETWEEN COLOR AND MONOCHROME ADAPTERS ............... 46
7.6 LOGGING YOUR BUILDS................................................................................... 48
8 TROUBLESHOOTING ............................................................................................... 49
8.1 THE BINDER SOLUTION IS BEING APPLIED IN ERRATIC STRIPES............. 49
8.2 THE SYSTEM SOFTWARE FREEZES DURING USE ...................................... 49
8.3 THIN PLANAR PARTS ARE WARPING ......................................................... 49
8.4 NOTHING HAPPENS WHEN I TRY TO PRINT .............................................. 49
8.5 MY STARCH-BASED PARTS ARE UNUSUALLY “CAKEY” .............................. 50
8.6 PARTS ARE UNUSUALLY WEAK OR CRUMBLY ............................................. 50
8.7 PRINTER LOOKS LIKE IT IS PRINTING, BUT IS NOT LAYING DOWN BINDER50
9 Z402C SYSTEM DETAILS......................................................................................... 51
9.1 DESCRIPTION OF REAR I/O PANEL................................................................. 51
9.2 SYMBOLS USED................................................................................................. 52
9.3 SYSTEM SPECIFICATIONS ............................................................................... 53
9.4 MATERIAL STORAGE PRECAUTIONS ............................................................. 54
10 INDEX......................................................................................................................... 55
2
Z Corp Service (781)852-5050/(877)88-ZCORP