Z402C System User Manual
Z Corporation
3.2.2 RINSING THE CARWASH
The Carwash cleans the nozzle array of the Print Head during printing.
Rinse the Carwash
before and after each build.
Squeegee
Figure 5: Carwash Detail
To clean the Carwash:
1. Take the machine Offline.
2. Open the Top Cover.
3. Manually pull the print head forward, out of its parked position.
4. Rinse the Carwash, especially the Squeegee, with distilled water. This will
dissolve any dried deposits of powder. Never dry out the carwash area.
5. If there is any powder inside the gantry along the path of the print head, vacuum or wipe
it up.
6. Push the print head back to the parked position. Close the clear Top Cover.
3.2.3 CHECKING FLUID LEVELS
1. Open the doors at the bottom front of the machine.
2. Check the jugs on the left side. If the binder waste bottle on the left is three-
fourths full, empty it out. Binder waste should be treated in accordance with local
regulations. If the binder supply jug is approaching the bottom rim of the bottle,
replace it by unscrewing the top from the empty bottle and refastening the top to
a full binder solution bottle.
3. Close the doors on the front of the machine. Do not run the printer with the doors open.
2
Store binder in a cool, dry place away from the sun. Keep tightly capped. Keep away from heat. Gloves and
safety glasses are recommended to avoid direct contact.
www.zcorp-users.com
27
