Page 7
3. Hardware Installation
The following sections in this chapter describe how to install AG-623G2 Module
3.1. Installation Overview
AG-623G2 wireless module is design for Access Point, Router, ATU-R, Printer Server
series, IP Camera series and Internet Video Server only.
3.2. Safety Recommendations
The safety guidelines are as follows:
Keep the board area clear and dust-free before, during, and after installation.
Keep tools away from walk areas where you and others could fall over them.
Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains that
could get caught in the board.
Wear safety glasses if you are working under any conditions that might be hazardous
to your eyes.
Do not perform any action that creates a potential hazard to people or makes the
equipment unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
3.3. Maintaining Safety with Electricity Warning:
Before working on a board or working near power supplies, unplug the power cord on AC
units; on DC units, disconnect the power at the circuit breaker. Follow these guidelines
when working on equipment powered by electricity:
Do not work alone if potentially hazardous conditions exist anywhere in your work
space.
Never assume that power is disconnected from a circuit; always check the circuit,
extension cables, frayed power cords, and missing safety grounds.
If an electrical accident occurs, proceed as follows: – Use caution; do not become a
victim yourself. – Disconnect power from the system. – If possible, send another
