background image

 

                                                    Page 6 

1. Introduction  

54Mbps IEEE802.11a/b/g Wireless Network Mini PCI Adapter is the perfect solution for 

your wireless network applications based on the IEEE 802.11a/b/g standard offering a 

data rate of 54Mbps in a wireless LAN environment. AG-623G2 is designed for Access 

Point, Router, ATUR, Printer Server series, IP Camera series and Internet Video Server 

gives you wireless access the web and network resource without the wire. AG-623G2 

provides high-speed access to network resources and has built-in 40/64-bit, 128 bit and 

256 bit of WEP (Wired Equivalent Privacy) data encryption. With Direct Spread Spectrum 

Signaling (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM), domain 

access control, WEP encryption and group security, the modules will safeguard all your 

wireless data transmissions from your nosy neighbors. AG-623G2 allows you to take full 

advantage of your devices mobility with access to real-time information and online 

services anytime and anywhere. 

 

2. Features  

1.  Complies with IEEE 802.11a/b/g Standard for Wireless LAN. 

2.  Works with All Existing Network Infrastructures. 

3.  Compatible with Wi-Fi Wireless Products and Services.   

4.  Capable of up to 256-Bit WEP Encryption. 

5.  Freedom to Roam While staying Connected.   

6.  Delivers data rate up to 54 Mbps in G mode and up to 108 Mbps in Turbo AG mode. 

7.  Two UF-L Connectors for External Antenna.   

8.  Support Antenna diversity for Better Sensitivity.   

9. Lower 

Power 

Consumption. 

Summary of Contents for AG-623G2









Reviews: