-
FLAT
：
It is 709 like curve with color information, and lower the contrast for easy
post processing.
-
HLG
(Hybrid Log-Gamma): Encode the high-light and low-light parts of the HDR
signal in two different ways in which the low-light part use the standard gamma
curve and the high-light part use the logarithmic curve.
Sharpness
: Strong / Medium / Week, default Medium.
Brightness
: 0~100, default is 50.
Saturation
: 0~100, default is 50.
Contrast
: 0~100, default 50.
Luminance Level
: Full / Limited. The range of luminance level is 0~255 when it’s set
to Full, and 16~235 when it’s set to Limited.
2.9. Connect
Network:
there are sub-items as below:
Wi-Fi
: Off / On. When the Wi-Fi is activated, here will show the Wi-Fi ID, which
is ZCAM-E2-XX-XXXX (last four digits which match to the camera ID), and the
default password is:
12345678
, which can only be changed with iOS app (
6.
Using Z Camera App
)
Wi-Fi IP
: Here will show IP address of the Wi-Fi when it’s is activated.
ETH. Mode (Ethernet Mode)
: Direct / Router / Static
-
Router
: Camera is connected to the computer through a router, IP
address will be assigned by the router.
-
Direct
: Camera is connected to the computer directly through Ethernet
