DISTRIBUTION ZHC
User Manual and Installation Guide
13
changed, the pin button, labeled “B” on the rear of the enclosure must be pushed in for ~10
sec’s. This will unlock the unit and place it back to its original factory settings.
7.
Repeat this procedure for the next higher slave level, if necessary.
8.
If the next highest Slave level in in a different closet, make sure to bring up the closet
with the lower Slave level fist
Contact Us:
If issues arise while performing the install, please contact Z-Band. We will be glad to assist. The
number is: 717.249.2606 and press 2 for Engineering.
Our business hours are:
8:30-5:00 Eastern Time, Monday-Friday.
