9
Before powering on, please read the manual carefully.
TIMER
1. Plug into power source, turn the nob to the desired position. The sand filter will begin working immediately.
2. Turn the nob on the “0” position. The sand filter will stop working immediately.
3. After turning on, you can adjust work time, rest time and cycle time by turning the knob to desired position. See the table
below for more details.
4. When the timer knob is moved into new position, the filter’s previous cycle automatically cancels so new cycle can begin.
5. Each time the filter is powered on or restarted, a new cycle will begin based on timer knob position.
NOTE:
If the knob is adjusted to the 24-hour position (24), the sand filter will work continuously without any rest period.
A
B
26-1
26-2
c
D
FOR POOL WITH 32 MM (1.25 IN.) VALVE
STOP
OPERATION
CONTROL VALVE OVERVIEW
WARNING:
To prevent equipment damage and possible injury,
always switch off sand filter before changing the Control Valve
function. Changing valve positions while the pump is running can
damage the Control Valve, which may cause personal injury or
property damage.
How to Use the Control Valve:
Press down on the Control Valve handle and rotate to
desired function.
CONTROL VALVE FUNCTIONS
The Control valve is used to select 6 different filter
functions: Filter, Closed
,
Backwash, Rinse, Drain and
Circulate.
Knob Position
0
6
8
10
12
24
P4
P6
P8
Working time(H)
/
6
8
10
12
24
4
6
8
Rest time(H)
/
18
16
14
12
0
4
6
8
Cycle period(H)
/
24
24
24
24
24
8
12
16
D
A
C
Bestway
Summary of Contents for 5.7M3/H AVEC TIMER
Page 1: ...58497 Hmax 1 5 m GROUPE DE FILTRATION 5 7M3 H AVEC TIMER ...
Page 35: ......
