YZ Systems DynaPak DP-2010RXN, Instructions & Operating Manual

Page: 15 / 62

YZ Systems, Inc. • 3101 Pollok Drive • Conroe, Texas • USA • 77303 • P: 936.788.5593 • F: 936.788.5720
Page 11 DP-2010RXN ver.07022002
SSSSS
ECTION ECTION
ECTION ECTION
ECTION
3: 3:
3: 3: 3: S
S
S S S
AMPLE AMPLE
AMPLE AMPLE
AMPLE
V VV
V V
ESSEL ESSEL
ESSEL ESSEL
ESSEL
I I
I I I
NST NST
NST NST
NSTALLA ALLA
ALLA ALLA
ALLATION TION
TION TION
TION
Variable Pressure/
Constant Volume Cylinders.
Spun cylinders may be installed in a horizontal
position on the DynaPak BackRack vessel rack.
Avoiding traps in the line, install stainless steel
tubing and fittings from the sample discharge
port of the sampler to the product end of the
sample cylinder.
300cc and 500cc spun cylinders may also be
installed in a vertical position. Piping from the
sampler dischage port to the sample vessel
should be arranged so that liquid traps are not
created.
Variable Volume/
Constant Pressure cylinder.
The free-floating piston cylinder (DuraSite),
figure
54 on page 44 , may be installed in a horizontal
position on an optional vessel rack. Free-floating
piston cylinders should NOT be installed on the
DynaPak BackRack vessel rack.
Install 1/8" tubing from the sample discharge port
of the manifold to the product end of the vessel.
Avoid traps in this line.
LinkPlus. Install the optional LinkPlus directly
into the sample discharge port of the sampler.
Use stainless steel tubing and fittings to connect
the LinkPlus outlet to the product end of the
sample cylinder.