background image

 8825 N. Sam Houston Pkwy 

West 

 Houston, Texas 

USA  77064 

 P: 281.362.6500 

F: 281.362.6513

Em: [email protected]

Web: www.yzsystems.com

YZ Systems,represents and warrants that for a period of 2 years from receipt of the product: (1) the product will be free from defects in materials and workmanship; and (2) the 

product will perform substantially in accordance with product manuals, literature, or documentation.  Any written or oral information or advice given by YZ representatives, 

agents, or employees will in no way increase the scope of this warranty.  If the product fails to comply with the warranty set forth herein, YZ’s entire liability and the customer’s 

exclusive remedy will be replacement of the product(s) or, at YZ’s option, YZ’s reasonable effort to make the product meet the warranty set forth herein.  YZ disclaims all other 

warranties, either expressed or implied, including but not limited to, implied warranties or merchantability and fitness for a particular purpose, with respect to the product.  This 

limited warranty gives you specific legal rights.  You may have others, which vary from state to state.  These remedies are not available outside of the United States and Canada.  

In no event shall YZ or its suppliers be liable for any damages whatsoever (including, without limitation, damages for loss of profits, business interruption, loss of information, or 

other pecuniary loss) arising out of the use of or inability to use the product, even if YZ has been advised of the possibility of such damages.  Information contained in this doc-

ument is subject to change without notice and does not represent a commitment on the part of YZ Systems.  All prices quoted are in U.S. dollars,YZ support services are subject 

to YZ’s then-current prices, terms, and conditions, which are subject to change without notice.  All prices and specifications, if published, are subject to change without notice.

                                                        

Summary of Contents for DTEX DX1000G/L









































Reviews: