12
Cleaning and disinfecting
This product is a reusable non-sterile device. Please clean and disinfect
according to the following methods.
Warning:
1.Never immerse or soak the oximeter.
2.We recommend cleaning and disinfecting the oximeter before or after each use, or
in accordance with the policies established by the hospital, to avoid long-term
damage to the oximeter and avoid cross-infection.
3.Never use cleaning agents/disinfectants other than the recommended.
4.The sensor component is not cleaned and disinfected during testing.
5.Avoid the use of metals such as steel wire brush or polishing agent abrasive
material which will damage the oximeter panel .
Cleaning
The recommended cleaning agents include: water
1.Shut down the finger pulse oximeter and remove the battery.
2.Clean the oximeter with cotton or soft cloth moistened with water.
3.After cleaning, wipe off the water with a soft cloth.
4.Allow the oximeter to air dry.
The most commonly used hospital cleaning and non-corrosive liquid detergent
can be used to clean the oximeter. Pay attention to diluting cleaning detergent
before use, following the manufacturer's instructions.
Avoid the use of ethanol-based, amino-or acetone-based cleaning agent.
Oximeter shell should be maintained from dust pollution, use a soft cloth or lint-free
cleaning agent with the sponge to wipe. Make sure no liquid will enter into the
equipment.
Disinfecting
The recommended disinfectants include: ethanol 70%, isopropanol 70%
1.Shut down the finger pulse oximeter and remove the batteries.
2.Clean the oximeter as instructed above.
3.Disinfect the oximeter with cotton or soft cloth moistened with one of the
recommended disinfectants.
4.After disinfection, be sure to wipe off the disinfectant left on the oximeter with a
soft cloth moistened with water.
5.Allow the oximeter to air dry.