Yuwell BreathCare PAP, User Manual

Page: 9 / 18

13 14
Caution:
During your therapy, you can go to the clinical menu by Pressing and holding START/STOP button and
dial at the same time for three seconds. Section 11.2 clinical menu tells the method to change all the
parameters.
12. Caring for your device
It is important that you regularly clean your device to make sure you receive optimal therapy. The
following sections will help you with disassembling, cleaning, checking, reassembling your device.

12.1 Disassembling
1. Pull the power connector out of device 2. Hold the cuff of the air tubing and gently
pull it away from device
3. Press the Slide switch, and take out the water
tank.
4. Pour out the left water in the water tank.
6 5
5. Press the water tank gently and pull it away
from the device.
6.
swivel of the mask, then gently pull apart.
Notice: Don't pull the threaded portion
of the air tubing

12.2 Cleaning
WARNINGS!
• Regular cleaning of the device and its accessories is very important for the prevention of respiratory
infections.
• To avoid electric shock, always unplug the device before cleaning.
• Use mild soap that is nontoxic to humans.
• Before cleaning, check whether the device has been disconnected from the power supply, whether
the power cord has been unplugged, and whether the water tank of the device has cooled down. Make
sure the plate has cooled down to room temperature, so you do not get burned.
• Do not open or modify the device. There are no user serviceable parts inside. Repairs and servicing
should only be performed by an authorized service agent.
CAUTIONS!
• Overheating of the materials could lead to early fatigue of these materials.
• Do not clean the device with bleach, chlorine, ozone, UV light, aromatic solution, moisturizing factor,
antibacterial soaps, sesame oil, or any other methods outside of this manual.
•