YUSHI INSTRUMENTS
3
1.4.2 Probe Connection
When you use YUT-2620, we recommend using our stock probe connecting cable with the
appropriate probes. Various types of our standard stock probes can be used directly.
The probe should be plugged into the socket upside the instrument. When it is the mode of single
probe, the probe cable should be connected to T/R socket; when it is the mode of dual probe (one for
transmitting, the other for receiving), you should plug the transmitting probe into the T/R socket and the
receiving probe into the R socket. If these factors are not paid attention to, unfavorable results might be
loss or disordered echo waveform.
1.4.3 Switching On and Off the Instrument
Press to directly start up YUT-2620 and activate the standby mode. After the detection and
data storage, press to shut down the instrument.
1.4.4 Restore the Initial Parameters of the Instrument
If the instrument crashes or some functions are in disorder or the parameters of the instrument need
resetting, press twice before press (up) key or (down) key to select the submenu
resetting parameters. Then press (left) key or (right) key to adjust the parameters. When the
screen displays resetting parameters confirmation, press Ok to restore the parameters.
Note: after the instrument is initialized, all the parameters are reset to the factory defaults.
1.5 Main Menu and Functions
1.5.1 Main Menu
Main
Menu
Submenu
Functions
Basic
Gain,
Compensation,
Sound
Velocity,
Sound
Path,
Displacement, Scale, Reject, Wave Height Readings
Basic Parameters in
Detection
Setting
Waveform Filling, Color Scheme, Language, Unit, Alarm,
Automatic Wave Height, Date, Time, Parameter Resetting,
Basic Functions of the
Instrument
Gate
Gate A Start, Gate A Width, Gate A Height, Gate A Mode,
Display Mode, Gate B Start, Gate B Width, Gate B Height,
Gate B Mode, Measurement Point
Relevant Options
Setting Gate