4.2 Support of Test piece
The heavy workpiece do not need support
The Mid-heavy workpiece must be placed on a flat, sturdy surface, and
absolutely smooth placement, without any shaking.
Light workpiece must be tightly coupled with the solid support body, the
coupling surface must be smooth, and Coupled dosages don’t too much,
Test direction must be perpendicular to the coupling surface.
When the workpiece is a large area of Sheet, Pole and Bending Parts,
Even if a large weight and thickness may still cause deformation, so
reinforcement and support in the rear surface of the test point is necessary.
5. Operation
5.1 Display
5.2 Keyboard
5.3 Turn on the instrument
Press to power on the LM100, the screen will display the default interface
for the first time, then power on again will display the last parameters
automatically,
5.4 Parameters Setting
5.4.1 Material
Press “MTL” button to choose the material, code no. from 0-8:
Code
Hardness
Tensile strength
0
Steel and Cast Steel
C
1
GC. IRON
CrNi
2
NC. IRON
CrMo
3
C. ALUM
CrV
4
BRASS
CrMnSi
5
BRONZE
SSST
6
COPPER
SST
7
SST
CrNiMo
8
Forging Steel
Cr
9
Alloy tool steel
9 10
