YUNEEC SS-3.0CG, Instruction Manual

Page: 16 / 21

- 13 -
3G Setup
Enter your local operator’s 3G APN, and corresponding Username and
Password.
Note: Only with 3G setups added, can SMTP and FTP functions work.
Note: it’s not a must to enter Username and Password of APN. But some
operators may require this password access to enable GPRS function. For
details, pls contact your local operator.
MMS
ON/OFF
You can simply choose to allow pics to be sent to your phone number via MMS
by switch ON/ OFF MMS function here.
SMTP Setup
Camera comes with default SMTP setups; you only need to enter receiving email
accounts in “Send to”
Pls finish setups below if you’d like to use your own SMTP server.
1) Enter your mailbox server IP;
i.e.: Hotmail IP: smtp.live.com;
Gmail IP: smtp.gmail.com;
2) Enter your mailbox port;
Port of most mailbox is 25; Pls enter your mailbox corresponding port.
3) Enter your mailbox password access.
Note: 1. SMTP only send photos to preset emails; if SMTP is with wrong information entered,
then emails will not be able to receive photos from camera.
2. MMS stops sending photos to email when SMTP is set to work.
FTP Setup
1) Enter your FTP server IP;
i.e.:
FTP Server IP: ftp://dianwan2008.gicp.net/
Enter: dianwan2008.gicp.net
Gmail IP:
smtp.gmail.com;
2) Enter your FTP server port;
Port of most FTP server is 21; Pls enter your FTP server corresponding port.
3) Enter your FTP server password access.
Note: FTP only upload photos to preset FTP account; if FTP is with wrong information
entered, then FTP account will not be able to receive photos from camera.
Send To
Phone Enter recipients’ phone numbers (1~2)
Email Enter recipients’ email accounts(1~2)
SIM PIN
You can ignore description below if your SIM has been activated already.
(Phase “Pls input PIN-Code” will not pop up after signal search if your SIM is
activated.)
1) Camera will check if inserted SIM card is activated during signal search in “Test” mode;
2) If SIM is not activated, “Pls input PIN-Code” will pop up on screen after signal search;
3) Then “SIM PIN” will turn to be configurable in “3G” page of Menu;
4) Enter PIN code in “SIM PIN” and save to exit; when you restart the camera after you enter
the PIN code, camera will activate SIM card automatically during signal search;
Note:
1) “Pls input PIN-Code” will pop up again if wrong PIN code is entered;