- 12 -
longer detection distance; 3) easier for sensor to detect difference between
body heat and outdoor temperature; 4) easier to trigger camera to record. In
high temperature
environment, body heat of subjects and environment
temperature is hard to tell by camera, suggest setting
“High”
.
Delay
Select “ON”, press “OK”, to set a time interval that you desire between
photos/videos upon motion. This option avoid camera taking too many photos
or videos.
Example:
Camera will wait 1 minute between photo/video recordings with
motion if pre-set time interval is 00:01:00
Configurable delay time:
00:00:03~23:59:59.
Note: Pls don’t turn ON Time Lapse and Delay simultaneously!
Time Lapse
Select “ON”, press “OK”, to set the interval;
PIR sensor of camera will be
turned off;
camera will shoot pics or video clips automatically upon the interval
user set.
Configurable interval:
00:00:03~23:59:59.
Note: Pls don’t turn ON Time Lapse and Delay simultaneously!
Timer
Select “ON”, press “OK”, to set the beginning time and end time (hour/minute);
camera will only work during the time period user set.
i.e.: 15:00 – 18:00; camera only works during 15:00 – 18:00
3G
SIM Auto Match
1) Camera will automatically enter MMS & 3G setups when the SIM card is inserted;
2) If
"SIM Auto Match failed, pls enter setups manually"
pops up on screen, pls switch
“SIM Auto Match”
to
“Manual”
mode, then enter MMS & 3G setups in
“Manual Setup”
;
Manual Setup
(Pls enter setups below manually in “Manual” mode if your local operator can’t be
automatically matched by camera itself.)
MMS Setup
Pls contact your operator for
URL/ APN/ IP/ Port (Username & Password if
required); a
nd enter these infomation manually.
(We’ll add the needed operator info into “SIM Auto Match” list whenever we’re
informed with the detail effective information.)
Note: 1. With MMS setups added, camera can send photos to preset
phones/ email. If MMS is with wrong information entered, then phones/
email accounts will not be able to receive photos from camera.
2. Email box receive photos from camera via SMTP only when SMTP is
ON.
