background image

19

Cleaning/maintenance

4

       

WARNING!

Disconnect the appliance from the 

mains before you clean or maintain it.

Ignoring the cleaning and mainte-

nance instructions will cause an 

increased risk of fire.

Clean the housing of the appliance 

with a suitable detergent. Use such a 

product carefully and economically.

Do not clean the control panel with 

a detergent. Use a damp cloth.

Otherwise you may damage the 

electronic components of the con-

trols.

Never use any alcohol-containing 

detergents to clean matt black pain-

ted appliances as these detergents 

cause colour-changes.

Clean the glass panels

4

 with a suita-

ble detergent only.

When you clean or replace the grea-

se filters or the carbon filters also 

clean all visible components on 

the bottom of the appliance with a 

mild, non- acrid and fat-dissolving 

detergent.

Do not damage the grid of metal-

made grease filters. The colour of 

the metal surface may change due 

to frequent cleaning as well as the 

use of aggressive detergents.

Such changes do not influence the 

capacity of the appliance and are 

no reason for complaint.

Do not use a steam cleaner. RISK OF 

ELECTRIC SHOCK!

Do not use any abrasive detergents.

1

2

6

4

7

8

       

NOTICE!

Take off all rings and bracelets before cleaning or maintaining the appliance; 

otherwise you will damage the surface of the appliance.

3

5

9

Aluminium filter

4.1 Grease filter

Clean the aluminium filters once a 

month by hand or in a dishwasher 

(300). Do not

use any acrid or corrosive detergents. 

Do not use any abrasive detergents! 

Do not

use any alkaline dishwasher-deter-

gents! (ph more than 7). Do not put 

the filter in

the dishwasher together with tablewa-

re Filters which are blocked with food 

debris

do not carry a guarantee. Dry the filters 

properly before you reinstall them.

4

 Equipment depends on model.

 

 

 

 

 

36 

 

  WARNING!

 

Install  the  carbon  filters  safely  and  properly;  otherwise 

the carbon filters can loosen and cause hazardous situations. 

NOTICE! 

The suction capacity is decreased by installed carbon filters. 

 

 

You can order the carbon filters at 

www.pkm-online.de 

 

 

 

 

 

 

 

 

 

 

 

3. Control panel 

 

 

Switches the light on.. 

Off. 

Low speed. 

Medium speed. 

High speed. 

 

NOTICE!

 

Never press two speed-buttons at the same time. To change 

the speed select "0" first!

 

NOTICE! 

Only switch on the lights while the appliance is operating. Do 

not switch on the lights to lighten the room.

 

 

Summary of Contents for DUANA




























Reviews: