45
Liquid on the sensors.
You used your fingertip.
You used unsuitable cookware with
sharp edges.
You used an unsuitable detergent,
e.g. an abrasive.
Your cookware is produced with
layers made of different kinds of
metal.
Dry the sensors.
Use the bottom of your top phalanx.
Use suitable cookware.
Use suitable detergents.
This is normal for such a cookware
and does not indicate a malfunction.
Caused by induction-cooking.
Normal operating condition, but the
noise should decrease or disappear
after decreasing the heat setting.
The cooling-fan the appliance is
equipped
with
protects
the
electronics from being overheated. It
may continue to run even after you
have switched the appliance off.
Cookware cannot be detected,
because it is unsuitable, too small or
improperly positioned on the
cooking zone.
Normal operating condition. Do not
disconnect the appliance from the
mains while the fan is running.
Use suitable cookware which meets
the diameter of the cooking zone.
Place cookware on the centre of the
cooking zone.
Technical malfunction.
Note the complete error-code,
disconnect the appliance from the
mains and contact the aftersales
service.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact a service department.
The appliance or a cooking zone has been switched off automatically and
unexpectedly, an acoustic signal sounds and an error code is displayed
(typically alternating with one or two digits on the timer-display).
The appliance makes humming noise when used on a high heat setting.
Cookware does not become hot and the relevant symbol is displayed.
Noise caused by the fan inside the appliance.
Some cookware make cracking or clicking noise.
The glass ceramic is scratched.
The sensors are difficult to operate.