background image

 

DISTINGUISHING FEATURES OF THE PHANTOM 

 

 

Five (three - if EMP66G-2 tube employed) readily available configurations of illuminated red-on-
green reticles that are able to be switched at a moment's notice 

 

Functions with one AA (1.5V) or CR-123 (3V) battery 

 

Accurate internal front lens focus adjustment 

 

Lightweight and highly durable; manufacturing employs carbon plastic and other modern 
technologies 

 

High magnification, 3x or 4x  

 

Close observational range of 5 meters 

 

IPX6 rating against water intrusion 

 

Shockproof with the use of heavy recoil ammunition (.375 H&H, .416 Rigby, .50 cal.), up to 6000 
joules 

 

Vertical positioning of the battery ensures an uninterrupted power supply when firing 

 

The image intensifier tube is protected against excessive light exposure  

 

Incremental reticle brightness adjustment 

 

The reticle will blink as a warning 15-30 minutes before the device shuts down automatically as a 
low battery indicator  

 

Stabilized power supply for optimal consumption, ensuring no shift of the aiming point under a 
continuous power draw or drop in temperature 

 

Fast start-up 

 

Ergonomic design; the adjustment controls are located on top 

 

Precision internal windage/elevation adjustment MOA per click 

 

Built-in high-power PULSE hazard free IR illuminator with beam focus 

 

Remote control with secure attachment 

Summary of Contents for PHANTOM 26057T









Reviews: