Yueming MC180-D-A, Product Manual

Page: 14 / 47

6
1.2 Equipment Parameters
The equipment parameters are different due to the model and configuration. The actual product nameplate and
attached factory parameters shall prevail. The nameplate is usually on the back or the left side of the machine.
Below is the nameplate of MC180-D-A:
Fig.1-8 Machine Nameplate
The machine parameters on the nameplate are as follows:

Model: The machine model;

Laser Type: The machine is equipped with carbon dioxide laser tube;

Laser Power: Rated power of the laser;

Operating Area: The processing format of the equipment; the largest single marking area is 600mm x
600mm;

Power Supply: The total input power of the equipment, typically AC 220V; export models vary by
country;

Total Power: The rated power of the equipment while operating;

Manufacturing No.: a unique number of each machine;

Date of Manufacture: The production date of the machine;
Series Laser Equipment
Model:____________ MC180-D-A______________
Laser Type:___________CO
2
________________
Laser Power:_____________180_____________W
Operating Area:_____600______X_______600__
Power Supply:_______220V±10% 50/60Hz_____
Total Power:___________7__ _______________W
Manufacturing No.
:________________________________
Date of Manufacture
:________________________________
Manufacturer
: GD Han’s Yueming Laser Group co., LTD.
TEL: 0769-8983888 0769-89839999__________
Website: http://www.ymlaser.com_______________
E-mail: yueming@ymlaser.com_____________