- 11 -
Power supply: the master imputer power supply of the machine. They are generally
AC220V. However, the exported types differ from each other due to the countries
exported to;
Series No.: the unique number of each machine;
Manufacture Date: the date on which the machine is produced;
In addition, each device is attached with an independent ex-factory parameter list usually
stuck on the inner part of right end cover of the machine. The parameter lists are different from
each other due to the differences of type of machine and configured controller. The following is a
parameter list for CMA1325:
Type
Ⅲ
machine ex-factory parameter list
Item
□
A axis
□
Z axis
√Y axis
√X axis
Pulse/mm
328.98
157.82
Max. stroke (mm)
2500
1300
Control method
P+D
P+D
Max. speed (mm/s)
300
400
Max. acceleration (mm/s
2
)
3000
16000
Reset direction
-
+
Zero (limit) level (Note 1)
Algorism numerical value (240)
-
+
-
+
-
+
-
+
1
1
1
1
0
0
0
0
√Laser head 1
□
Laser head 2
Power control signal
□
PWM
□
Frequency √Analog
□
PWM
□
Frequency
□
Analog
Energy regulation method
√Dynamic energy
□
Constant Energy
□
Dynamic energy
□
Constant Energy
PWM frequency (Hz)
(Note 2)
Pre-voltage (V) (Note 2)
1.0
Focus (mm)
63.5
Space between two laser
heads (mm)
Note 1: level trigger signal; high level trigger is o, low level trigger is 1, and suspension is 1;