56/91
Ad-hoc
i
s a short term derived from wireless ad hoc network, known as
WANET
.
This type of network is only established temporarily, and does not rely on a
pre-existing network through a router or Wireless Access Point.
How to connect to an ad-hoc Wi-Fi network in Windows 8.1
To make the Ad-hoc mode available, follow the steps below.
This is done manually.
Note that this demonstration applies to Windows 8.1
since the Windows 8.1 system no longer shows Ad-hoc network in the
Wi-Fi list.
The following example is based on another type of IP camera.
G
o to “Control Panel”, then “Network and Internet”.
