35
Note: The user can only set up 1 area under 1 Area Setup mode. In this
case, the user can only drag the blue frame. If the user wishes to set up
other frames, they need to choose
Exit With/Without Saving
from the
mini menu and set up other frames by clicking on other Area Setup
buttons.
The masked areas will be displayed once Area1/2/3 boxes are ticked.
E2. For FHD Cameras: (demonstrated with 4CH interface)
You may choose a color which you prefer to set the mask on by clicking
on the color button. A color palette will show up with a selection of colors.
In this case, the selected color is yellow.
When you tick
Enable
to activate the masking function, the whole
background of the setup page will change to your chosen color which
works as a confirmation of your
Mask Setup
.
You can either tick
Enable
before you start making a mask, or after the
mask is made.
Click or drag your mouse to highlight grids of your mask area. Right
click your mouse to display the mini menu and choose
Clean All
to
rearrange your area. Choose
Exit With Saving
or
Exit Without Saving
to exit this mode.