STEP
04 A
INSTALLING THE HANDLEBAR - RACE FACE ATLAS DIRECT MOUNT
a
Remove the screws of the stem from the upper fork crown (5 mm Allen wrench).
b
Place the handlebar and stem on the fork crown.
c
Install the stem on the fork crown (5 mm Allen wrench).
d
Tighten the screws gradually with only one turn per screw in an X pattern.
This is the only way to achieve even clamping of the handlebar in the stem.
e
Adhere to the guidelines of the manufacturer of the stem and/or handlebar when
torqueing the screws. Make sure that the clamp gap is even and that the handlebar is
centered and inserted correctly. The adjustment lines will help you with this.
Adjust the handlebar to your preferred position by using a 5 mm Allen wrench.
a
c
e
b
d
eng
During assembly, please adhere to the torque specifi cations of the manufacturers:
RaceFace Atlas Direct Mount
9Nm
Renthal Integra II: Fork crown screws (large)
10Nm
;
Handlebar clamp screws (small)
6Nm
YT Industries Direct Mount
5Nm
(Last updated 2015)
CAUTION!
!
