YT Industries TUES MKIII, Installation, Removal And Maintenance

Page: 14 / 26

1 4 y t
The axles are secured with an expanding cone
to avoid them coming loose. Apply medium
strength thread lock to the cones before in-
stalling them.
Screw the axles in until the rocker link plates are
parallel to the pivot points. Then use a torque
key to tighten both axles to spec (8mm allen:
20nm, 6mm allen: 15nm).
Screw the expanding cones into the axles and
tighten them to 5nm using a torque key.
ATTENTION! Work with two tools
in parallel and at the same time,
to avoid tilting or putting tension
on the rocker link plates or causing
damage to other components.
SERVICE
LINK
1.13
1.14 1.15