YT Industries Jeffsy Primus, Assembly Instructions Manual

Page: 9 / 72

y t 0 9
Rear derailleur screw // 11 Nm
Please follow the
torque specifications of
the manufacturers:
EN
Make sure the bike is standing safely on the
rear axle stand. Turn the rear axle stand on its side. Carefully
cut the cable tie using a wire cutter and re-
move the bubble wrap and the foam transport
protection from the chainstay. Mount the rear derailleur on the derailleur
hanger (Allen key 5 mm). Please make sure
the bolt is perpendicular to the hanger to avoid
damaging the thread.
REAR DERAILLEUR ASSEMBLY
Tighten the rear derailleur screw using the
torque wrench. Make sure that the rear de-
railleur stop sits at the derailleur hanger stop.
Hold the derailleur with your second hand to
avoid a twisting of the derailleur and a gap.
3.4
3.1 3.2 3.3