y t
1 3
1 2
y t
f a m i ly i s n o t h i n g yo u c h o o s e .
u s u a l ly.
t h a n k yo u f o r c h o o s i n G U S a n d
W e l c o m e t o t h e Y T Fa m i ly.
EN
PEDAL ASSEMBLY
Attach the pedals to the cranks using an allen
wrench. Apply some grease to the threads, if
there are washers make sure to use them!
Please note that there’s a right and a left
pedal.
The non-drive side pedal has reverse thread-
ing and is therefore tightened counterclock-
wise. Tighten the pedals with a torque of
38 Nm.
TORQUES
C A U T I O N !
These specifications are only guidelines. As a rule, you should always observe the manufacturers’
instructions. These have also been included or can be found on the website of the respective
manufacturer.
Bottom bracket
33 – 41 Nm
Brake caliper screw to frame and fork
9,5 Nm
Shifter
2,5 – 4 Nm
Disc brake bolts to hub
6 Nm
Rear derailleur (fixing bolt)
8 – 10 Nm
Rear derailleur (clamp bolt)
4 – 5 Nm
Brake lever
2,8 – 3,4 Nm
Cassette retainer ring
40 Nm
Handlebar Clamp
5 Nm
Stem (steerer tube clamping)
5 Nm
Crank bolts
48 – 54 Nm
Chain ring bolts
12 – 14 Nm (steel )
8 – 9 Nm (Aluminum)
Pedals
38 Nm
Lock-on grip bolts
2,5 – 4 Nm
Shock bolts
10 – 12 Nm
1.1
1.2
