manualshive.com logo in svg

YSI SonTek RiverSurveyor, System Manual

Share
Download
YSI SonTek RiverSurveyor System Manual Download Page 185

SonTek/YSI Inc 

RiverSurveyor System Manual (May 1, 2007) 

173

Appendix G.  Bluetooth Communications 

G-1.  Overview 

Bluetooth

®

 

wireless technology is a short-range communications technol-

ogy intended to replace the cables connecting portable and/or fixed de-
vices while maintaining high levels of security. The key features of 

Blue-

tooth

 technology are robustness, low power, and low cost. The 

Bluetooth

 specification defines a 

uniform structure for a wide range of devices to connect and communicate with each other.  

As used in the SonTek RiverSurveyor/RiverCat systems, Bluetooth is a radio frequency teleme-
try system that provides serial data transmission and reception without a wire. Bluetooth operates 
at 2.4 GHz as a spread spectrum radio and draws its power from a laptop USB port. The maxi-
mum range has been tested to verify a 200-m line-of-site distance when the laptop and the sur-
veying instrument each has a dipole antenna.  

The Bluetooth radio modems used in the RiverSurveyor/RiverCat systems come from the factory 
paired. They are ready to be plugged into the computer and should readily communicate with the 
Mini-ADP system. Since the connection essentially is accessing a serial port, no specific Blue-
tooth driver is needed. A CD has been provided with the necessary driver information for serial-
to-USB users. No ADP software or firmware revisions are required to work with the Bluetooth. 

The Bluetooth telemetry feature comes standard as a part of the RiverSurveyor Mini-ADP sys-
tem and the RiverCat system (3.0, 1.5, or 1.0-MHz acoustic frequency). 

Table G-1

 lists Bluetooth specifications. 

Figure G-1

, 

Figure G-2

, and 

Figure G-3

 show the Blue-

tooth radio modem and its accessories. 

 

 

Table G-1. Bluetooth Radio Modem Specifications

Power 

The Bluetooth radio modem runs on 5V power supplied through a USB ca-
ble adapter that plugs into the radio. 

Class 1 Device 

The paired Bluetooth radio modems tr18 dBm (63 mW) of power, 
which is the highest amount of power for all Bluetooth classes. 

Certification 

FCC and CE 

Operating Temperature 

-10 to +55°C 

Drivers 

No external Bluetooth drivers are required. However, a driver is required 
when using the serial-to-USB adapter we supply with each radio. This driver 
is supported within Windows and is also available on the RiverSurveyor CD. 

Bluetooth Version 

v1.2 

Transmit Range 

200 m (656 ft) 

Power Consumption 

The Bluetooth radio modem is specified to consume 0.5 W (100 mA @ 5 
VDC) maximum while in operation. 

Summary of Contents for SonTek RiverSurveyor



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands