manualshive.com logo in svg

YSI SonTek RiverSurveyor, System Manual

Share
Download
YSI SonTek RiverSurveyor System Manual Download Page 186

SonTek/YSI Inc 

RiverSurveyor System Manual (May 1, 2007) 

174

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure G-1. The connections shown at 
left include the following components 
(left to right): 3 dBi dipole antenna, 
Bluetooth radio modem, and USB 
adaptor. 

Figure G-2. The Bluetooth radio 

modem is connected directly to a

communication port (without the

USB adapter). The USB adapter is

optional, depending on the type of

ports available to the user.

Figure G-3. The electronics assembly (at left) is inte-
grated with the Bluetooth radio and the 5.5 dBi antenna. 
The antenna is connected to the Bluetooth radio. The two, 
red, illuminated LEDs indicate a good connection. 

      Bluetooth Radio Modem 
       (with USB power cable) 
Antenna                               USB Adaptor

Summary of Contents for SonTek RiverSurveyor



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands