15
PRESSURE UNITS
Highlight
Pressure Units
and press enter
to open a submenu that
allows you to change the barometric pressure units displayed on the
Run screen. Highlight the desired unit (mmHg, inHg, mbar, psi, or kPa)
and press enter to enable. The enabled pressure unit will have an ‘X’
in the box next to it. Only one unit may be enabled at a time. Highlight
the
ESC-Exit
box and press enter to save any changes and to close the
Pressure Units submenu.
LANGUAGE
Highlight
Language
and press Enter to open a submenu that will allow
you to change the language. Highlight the desired language (English,
Spanish, German, or French) and press enter to enable. The enabled
language will have an ‘X’ in the box next to it. Highlight
ESC-Exit
box and press enter to save any changes and to close the Language
submenu.
The text in the boxes along the bottom of the run screen will always be
displayed in English regardless of the language enabled in the System
Setup menu.
AUTO SHUTOFF
Auto Shutoff
allows you to set the instrument to turn off automatically
after a period of time after the last button press. In the setup menu, use
the up or down arrow keys to highlight
Auto Shutoff
, then press enter
to open the submenu. Press enter while the minute field is highlighted
to make it adjustable. Next, use the up or down arrow keys to adjust the
shut off time from 0 to 60 minutes. Press enter to save the new shutoff
time. Next, highlight the
ESC-Exit
box and press enter to close the
submenu. To disable Auto Shutoff, set the Time in Minutes to 0 (zero).
RESETTING THE SYSTEM SETUP MENU
TO FACTORY DEFAULT
To reset the Pro20/Pro20i settings back to factory default, press the
down arrow key while in the System Setup menu until the
Reset -
box is highlighted, then press enter. The instrument will prompt you
to confirm the reset. Highlight
Yes
and press enter to continue with
the reset or highlight
No
and press enter to cancel the reset. A Factory
Reset will not affect data saved in the instrument’s memory.
The following will be set in the Pro20/Pro20i after performing a reset:
