manualshive.com logo in svg

YSI 650 MDS, Operation Manual

Share
Download
YSI 650 MDS Operation Manual Download Page 70

YSI Incorporated

70

650 MDS

SECTION 15   REQUIRED NOTICE

The Federal Communications Commission defines this product as a computing device and requires the
following notice.

This equipment generates and uses radio frequency energy and if not installed and used properly, may cause
interference to radio and television reception. It has been type tested and found to comply with the limits for a
Class A or Class B computing device in accordance with the specification in Subpart J of Part 15 of FCC Rules,
which are designed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

 

Reorient the receiving antenna

•

 

Relocate the computer with respect to the receiver

•

 

Move the computer away from the receiver

•

 

Plug the computer into a different outlet so that the computer and receiver are on different branch circuits.

If necessary, the user should consult the dealer or an experienced radio/television technician for additional
instructions.  The user may find the following booklet, prepared by the Federal Communication, helpful: “How
to Identify and Resolve Radio-TV Interference Problems”.  This booklet is available from the U.S. Government
Printing Office, Washington, D.C. 20402, and Stock No. 0004-000-00345-4.

SECTION 16   650 MDS SPECIFICATIONS

Resistance to Water Leakage

: IP 67 for both the standard alkaline battery configuration and for the

rechargeable battery pack option.

Operating Temperature Range for Visible Display

: -10 to 60 Degrees Celsius

Storage Temperature Range

: -20 to 70 Degrees Celsius

Dimensions

: 9.13 inches long by 4.75 inches wide by 2.25 inches deep

Weight with 4 Alkaline C cells and no attached sonde or cable

: Approximately 2.1 lbs.

(960 g).

Display

: ¼ VGA; LCD with 320 by 240 pixels with backlight

Connector

: MS-8; Meets IP 67 specification

Standard Battery Configuration

:

4 Alkaline C Cells with detached battery cover

Optional Battery Configuration

:

Nickel Metal Hydride Battery Pack with attached battery cover and 110 volt charger

Summary of Contents for 650 MDS









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands