YSI 4110-3, Operating Manual

Page: 5 / 14

4110(W) General information
5 ba76137d04 10/2017
2.2 Opening and closing the IDS plug connection
This section only applies to IDS plug variants (4110W).
Opening the plug
connection

If necessary, clean the plug connection.

Open the locking device (step 1).

Use your thumb and index finger to press the clips of the connector
together, and pull the connector out of the plug (step 2).
Closing the plug
connection

Make sure that the plug connection is completely dry and clean.

Align the guidance of the connector with the groove in the plug and insert
the connector in the unlocked plug until it catches (step 3).

Close the locking device (step 4).
2
4
3
1
Plug connection
closed and locked
Guidance
Groove