background image

31

6.4.1  CALIBRATION

1. 

User can input the offset and/or gain values for different parameters while current offset and 

gain values are shown next to their corresponding blank.

2. Once completed, press 

Apply

 at the bottom of the SETUP page

The current offset value will show the previous value that you entered, please input the new 

value in the blank if any changes needed, the new value will effective once you press 

Apply

 

icon in SETUP page.

 NOTE:

Calibration of most parameter is not required, with the exception of Relative Pressure, which 

must be calibrated to sea-level to account for altitude effects.

7. 

PROWEATHERLIVE (PWL) LIVE DATA & OPERATION

7.1 

VIEW LIVE DATA

Login your ProWeatherLive account.

Once your device is connected, your device's live weather data will show on the dashboard 

page.

 NOTE: 

Please press "Help" in the 

 should you have any query on the PWL operation.

7.2 

UPLOAD TO OTHER WEATHER SERVERS

The ProWeatherLive.net service allows data from each weather station to be upload to other 2 

weather servers, such as WeatherUnderground, WeatherCloud, PWSWeather, or AWEKAS. For 

more information about their setup (e.g. creation of account, station ID and key), please refer to 

the HELP menu on ProWeatherLive.net.

Summary of Contents for YC9475






































Reviews: