8
Unscrew the battery door at bottom of unit and
insert the batteries according to the +/- polarity
indicated.
Screw the battery door compartment on tightly.
Note:
1. Ensure the water tight O-ring is properly aligned in place to ensure water resistant.
2. The red LED will begin flashing every 12 seconds.
Install the wireless 5-IN-1 sensor in an open location with no obstructions above and around the
sensor for accurate rain and wind measurement. Install the sensor with the smaller end facing the
North to properly orient the wind direction vane.
Secure the mounting stand and bracket (included) to a post or pole, and allow minimum 1,5m off
the ground.
Points to
NORTH
1.5 meter off the ground
MOUNTING GUIDELINES
1. Install the wireless 5-IN-1 sensor at least 1.5m off the ground for better and more accurate wind
measurements.
2. Choose an open area within 150 meters from the LCD display Main Unit.
3. Install the wireless 5-IN-1 sensor as level as possible to achieve accurate rain and wind
measurements.A bubble level device is provided to ensure a level installation.
4. Mount the wireless 5-IN-1 sensor with the wind meter end pointing to the North to correctly
orient direction of the wind vane.
A. Mounting on pole (Pole Diameter 1"~1.3" (25~33mm) B. Mounting on the railing
One Step Simple Setup
