INSTALLATION AND SETUP
Install WIRELESS 5IN1 WEATHER SENSOR
Your wireless 5IN1 sensor measures windspeed, winddirection, rainfall, temperature and humidity for you.
It’s assembled and calibrated for your easy installation.
INSTALL BATTERIES
Unscrew the battery door at bottom of unit and insert the batteries
according to the +/ polarity indicated.Screw the battery door
compartment on tightly.
Note:
Ensure the water tight Oring is properly aligned in
place to ensure water resistant.
The red LED will begin flashing every 12 seconds.
ASSEMBLY THE STAND AND POLE
Step 1
Insert the top side of the pole to the square hole of the
weather sensor.
Note:
Ensure the pole and sensor's indicator align.
Step 2
Place the nut in the hexagon hole on the sensor,
then insert the screw in other side and tighten it
by the screw driver.
Step 3
Insert the other side of the pole to the square
hole of the plastic stand.
Note:
Ensure the pole and stand's indicator align.
5
