- 16 / 23 -
Max. / Min. for temperature and humidity
•
Press “+” for displaying of indoor/outdoor max./min. of temperature
and humidity.
Temperature alert set-up
•
Press
“Channel”
to select the channel (CH1, CH2, CH3) if more
than one outdoor sensor is used
•
Press and hold the key then select between ON/OFF.
•
Press “MODE”, the upper limit temperature is flashing, use “+”, “-"
to set the maximum alert temperature.
•
Press “MODE “, the lower limit temperature is flashing, use “+”, “-"
to set the minimum alert temperature.
•
When the alert is activated, the alert symbol will be shown on the
left of the outdoor temperature display
Temperature alert on/off
Press and hold the key to set the temperature alert on or off.
•
Alert on: Temperature alert symbol shown in display
•
Alert off: Temperature alert symbol is not displayed
Notes
•
A temperature alert can be set-up for each channel.
•
The set-up process cannot be completed if the maximum
temperature selected is lower than the minimum selected
temperature.
•
The minimum temperature selected must at least be 1 °C below the
maximum selected temperature.
•
An alarm sounds and the temperature display flashes, when the
temperature from the signal of the transmitter exceeds the set
limits.
Sunrise /Sunset and Moonrise /Moonset
•
A nearby city for your location must be set to correctly display these
times for your area.
