- 14 / 23 -
•
Press
“MODE”
to confirm.
•
The display for the date is flashing. Use “+” and “-” to select the
date.
•
Press
“MODE”
to confirm.
•
The 12/24 hour is flashing. Use “+” and “-” to select.
•
Press
“MODE”
to confirm.
•
The display for the hour is flashing. Use “+” and “-” to select the
hour.
•
Press
“MODE”
to confirm.
•
The display for the minutes is flashing. Use “+” and “-” to select the
minutes.
•
Press
“MODE”
to confirm.
•
The country/city abbreviation is flashing. Use “+” and “-” to select
the city for Sunrise/Sunset and Moonrise/Moonset. You can find
a list of all device-available cities and their abbreviations at the
end of this manual.
•
Press
“MODE”
to confirm.
•
Note that while the sunrise
I
sunset or the moon rise
I
sunset times
are being sought (displaying dashes), the station does not
respond to keystrokes. Please wait for about 1 minute.
•
Also note that on some days there may be no moonrise or moonset
time.
•
The clock automatically changes from set-up mode to time display
mode if no keys are pressed for 20 seconds.
Daily alarm set-up
•
Press “MODE” to switch from time display to A1 (Alarm 1) display
•
Press and hold the key “MODE” for 3 seconds; the flashing alarm
time is shown
•
The alarm time hour flashes. Use “+“ and “-" to select the hour.
•
Press “MODE” to confirm.
•
The alarm time minute flashes. Use “+" and “-" to select the minute.
•
Press “MODE” to confirm.
•
Then press “MODE” to switch from A1 display to A2 display
•
The setting sequence for A2 is the same as for A1.
