Initial operation:
Open the clock battery compartment cover
Insert 2 x AA batteries observing polarity [ “+” and “-” marks]
When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, and you will
hear a beep tone, At the same time into work mode
Reception of the Radio signal:
The clock automatically starts the
MSF
signal search after 7 minutes of any restart or changing of new fresh
batteries. The radio mast icon starts to flash.
At 1:00 /2:00 / 3:00 am, the clock automatically carries out the synchronization procedure with the
MSF
signal to correct any deviations to the exact time. If this synchronization attempt is unsuccessful (the radio
mast icon disappears from the display), the system will automatically attempt another synchronization at the
next full one hour. This procedure is repeated automatically up to total 5 times.
To start manual
MSF
signal reception, press the “ ” button once. If no signals received within 7 minutes,
then the
MSF
signal search stops (the radio mast icon disappears) and start again at the next full one hour.
During RC reception
，
to stop searching radio signal, press the “ ” button once.
F.Y.I.:
A flashing radio mast icon indicates that the
MSF
signal reception has started
A continuously displayed radio mast icon indicates that the
MSF
signal was received successfully
The symbol "DST" indicating the time of receipt for daylight saving time.
We recommend a minimum distance of 2.5 meters to all sources of interference, such as televisions or
computer monitors
Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme
circumstances, place the system close to the window.
During the
MSF
radio receive mode, only the “ ” button function, other button operation have no function,
If you want to carry out other functions of operation, please press “ ” button to exit the
MSF
radio receive
mode.
Manual time setting:
Press the “ ” button to change the time displayed in 12-hour or 24-hour format.
Press and hold down the “ ” button for 2 seconds, the Button BEEP Sound Settings: ON or OFF, now use
“ ” and “ ” buttons to set BEEP in ON or OFF.
Press “ ” to confirm your setting, the Hour display starts to flash, now use “ ” and “ ” buttons to set the
correct hour.
Press “ ” to confirm your setting, the Minute displays starts to flash, now use “
” and “ ” buttons to set
the correct minute.
Press “ ” to confirm your setting, the Year display 2018 starts to flash, now use “
” and “ ” buttons to
set the correct year.
Press “ ” button to confirm your setting, the Month display starts to flash, now use “
” and “ ” buttons
