setting and move to the setting of alarm 2, press “
-
” (B7) or “
+
” (B8) button to
adjust the time for alarm 2, press “ALARM SET” button (B9) to confirm move to
setting of ALARM 3 & 4.
4.4 Snooze Alarm Function:
Slide “ALARM 1” “ALARM 2””ALARM 3” or “ALARM 4” switch to “ON” to activate
the corresponded alarm function. Alarm icon
display besides alarm time
when alarm function is activated.
When alarm alerts, press any buttons to stop the alarm. Otherwise, the alarm
signal sounds for about 2 minutes, then stops automatically
Light touch “SNOOZE/LIGHT” (B1) button when alarm alerts. “
” flashes on the
LCD. The alarm snoozes for around 5 minutes, then it alerts again. The snooze
function can be enabled for maximum 7 times.
Except “SNOOZE” button, press any buttons to stop the snooze alarm, or slide
“ALARM ON/OFF” switch to OFF to deactivate alarm function. Alarm icon
“
” disappear from the display.
4.5 12/24 Hour Display mode:
Press “+” (B8) button to select 12 or 24 hours mode.
5. Thermometer
If the temperature is out of the measurable range, LL.L (beyond the minimum
temperature) or HH.H (beyond the maximum temperature) will be shown on the
LCD.
6. Backlight/Auto light
Light touch “SNOOZE/LIGHT” button (B1), back light states for 5 seconds.
Slide “Auto-Light” switch (B11) to turn on/off the auto back light function.
In auto light turn on mode, if the light sensor detect the environment is getting
dark, the back light will be auto on.
7. Precautions
The clock loses its time information when the battery is removed.
Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
Never clean the device using abrasive or corrosive materials or products. Abrasive
cleaning agents may scratch plastic parts and corrode electronic circuits
