A7: Alarm time 3
A8: Alarm time 4
Part B-Button
B1: “SNOOZE/LIGHT” light touch
B2: “ALARM 1” Slide switch
B3: “ALARM 2” Slide switch
B4: “ALARM 3” Slide switch
B5: “ALARM 4” Slide switch
B6: “TIME SET” button
B7: “-“button
B8: “+” button
B9: “ALARM SET” button
B10: “RESET” button
B11: AUTO LIGHT ON/OFF slide switch
Part C-Structure
C1: Auto light sensor
C2: Battery Door
3. Getting Started:
Open battery Cover (C2)
Insert 2 pieces AA size batteries observing polarity *“ +” and “ –“ marks+
Replace battery compartment cover
The unit can be placed onto any flat surface; the unit is ready for use now.
Simple one Step set up:
Insert 2 x AA batteries, Press reset button at the back and then
leave it and don’t do anything , This clock will self set the time ,
by picking up the Radio control signal automatically, It may
take few minutes to few hours or for some locations, it may or
can take up 24 hours.
( You must keep this clock well away from mobile phones, TV,
Computer , Wi-Fi Hub or other electronic devices nearby , As
interference from these devices, some time block the Radio
control signal and RC function will not work and then you have
to set the time manually ) .
Please Note:
For Manual time setting, before you set the time, you must
make the
Icon Disappear,
by pressing the
button (B7) for 2 seconds
.