29
youngmangroup.com
5.2 loADIng AnD unloADIng
ramp loading
The BoSS X3X-SP has been designed so that it
can be driven up or down a ramp for the purpose
of loading and unloading. The maximum angle of
inclination allowed is 35% (19.2°).
The following procedure should be followed for
ramp loading:
1. Ensure the machine has been driven to around
50 centimetres in front of the ramp and that
the swivel castors are locked straight (using the
straight line lock button on the handset
controller)
2. Alight the platform
3. Unclip and lift the handset controller from the
platform and stand to the side of the ramp.
4. Press the DRIVE button on the handset
controller and then gripping the trigger on the
joystick push the joystick forwards until the
machine is correctly positioned on the trailer or
vehicle to which it is being loaded.
5. Tie down using adequately rates straps
threaded through the hoisting, winching and tie
down points
WArnIng
Under no circumstances stand behind or in front
of the machine when loading or unloading using
a ramp.
The machine must be unloaded and fully lowered
for ramp loading and unloading.
The SLOW SPEED switch must not be activated
for ramp loading.
forklift loading
The BoSS X3X-SP is equipped with longitudinal
fork lifting points located at the swivel castor end
of the machine.
Once located in the correct position on the vehicle
the BoSS X3X-SP should be anchored by means
of fully passed through the hoisting, winching
tightened and adequately rated straps and tie
down points.
Summary of Contents for BoSS X3X-SP
Page 45: ...43 youngmangroup com Notes...
Page 46: ...44 BoSS X3X SP Instructions for Use Notes...
Page 47: ...45 youngmangroup com Notes...