Youngman boss solo 700, User Manual

Page: 11 / 24

\RXQJPDQJURXSFRP
4XDQWLW\6FKHGXOH
;
;
ƒ
67$%$/,6(56
Stabalisers shall always be fitted when specified.
To improve stability, larger stabilisers can be used at a
lower level than shown in the quantity schedules.
Attach one stabiliser to each corner of the tower as
shown. Ensure stabiliser feet are equally spaced to form a
square.
SP4 and SP10 telescopic stabilisers must always be fully
extended.
Position the lower clamp so that the lower
arm is as close to horizontal as possible.
Adjust the position of the top clamp to
ensure the stabiliser foot is in contact with
the ground. Ensure clamps are secure.
When moving the tower, adjust the top clamps or the
telescopic leg, to lift the four stabiliser feet a maximum of
25mm off the ground and then unlock the castor brakes.
After moving ensure all four stabiliser feet are repositioned
in firm contact with the ground.
PLAN OF
TOWER
Free Standing Tower
In a Corner
Against a Wall
PLAN OF
TOWER
PLAN OF
TOWER