Young Living Rainstone, Operation Manual

Page: 6 / 16

6
2. Add 8–10 drops of your favorite essential oil into the water cup.
3. Remove the lid from the diffuser.
4. Pull the ventilation hole switch (F) up to close it so water does not get
into the internal electronics.
5. Pour the water and essential oil mixture into the water reservoir.
Continue filling with water until the water level reaches, but does not
exceed, the red water fill line. (If water exceeds the red water fill line, the
diffuser may not generate mist.)
6. Push the ventilation hole switch down to open it.
7. Place the lid back on the diffuser.
8. Plug the power line plug into the power adaptor input on the
diffuser base.
9. Plug the adaptor plug into a power socket.
10. Press the remote control “ON/OFF (8H)” button to turn on the diffuser,
LED light (alternating blue, yellow, and purple), and the ionizer with
automatic shut off after 8 hours or adjust settings as desired. (The
remote control should be used within 26 feet of the diffuser.)
11. The diffuser will run until the selected automatic shut-off time or until the
water reservoir is empty.
4 5 6