STEP6
Align the holes of the folding tube with the holes on the vehicle’s
2’’ hitch receiver
, then connect the two parts as shown below.
Place an
M16 Shockproof Bolt (16)
, through the
φ
16 Spring
Washer (17)
,
φ
16 Flat Washer (18)
and the aligned holes. Secure
the bolt in place with the
φ
3.8 pin (15)
, making sure to place the
pin through the holes on the bolt.
The diameter of lock beam
should be less than
7mm.
The lock is not included.
2"