10
This picture indicating the caps in broadband receiving position
The LED at the right corner of the main board indicates the IF working state. It flashes at
very strong signals because of the AGC function.
To transmit signal
TJ5A transmits in the following frequency range:
Meter Band
Frequency Range
40m
7.000000 – 7.300000
20m
14.000000 – 14.350000
15m
21.000000 – 21.450000
10m
28.000000 – 29.700000
Note:
The band pass filter is tuned to the center of the band. Therefore, the transmitting power might be
affected at band edges.
SSB operation
In LSB or USB mode, press PTT to enter transmission mode. Speak to the MIC and your
voice is transmitted. Output power can be observed on the power meter. The output
power can be adjusted through
PWR
knob. Do not operate CW key in LSB or USB mode,
because the side tone from the speaker goes into MIC, causing a strange CW signal, the
combination of 950 Hz and the carrier.
