YouKits EK-1B Operating Manual Download Page 4

Page: 4 / 4

Change the Frequency Tuning Steps

Pressing the tuning knob lightly will change the tuning step between 10Hz, 100Hz and 1KHz. When changing the step, the

related step position displaying on screen blink twice.

If you Pressing the tuning knob for 2 seconds, the tuning step will be 100KHz. (in the RIT mode, will be 10Hz and 100Hz).

If STEP changed in MEM mode, then it will automatically change to VFO mode

Transmitting

When transmitting on the frequency of: 714-14.35MHz, 18.068-18.168MHz or 21.0-21.45MHz, the EK-1B will display

TX at middle of LCD. Will show “NO” when out of the Ham bands.

Youkits

2013-7-30

Summary of Contents for EK-1B

Page 1: ...bout 420g without battery pack Working voltage 9 16VDC Current consumption RX 120 130mA TX 0 8A 12VDC Working Frequency RX 13 9 22MHz TX 14 0 14 35MHz 18 068 18 168MHz 21 0 21 45MHz IF DDS 60MHz Displ...

Page 2: ...Any resonant antenna can be connected directly to the antenna ANT with a BNC connector for non resonant antenna you will need to insert an antenna tuner Key Paddle The EK 1B has an automatic function...

Page 3: ...cy Press the V M SAV button for 2 seconds the LCD screen will display SAV the current frequency and current mode will be stored in the Memory Location selected RIT MOD button Click this button to ente...

Page 4: ...nk twice If you Pressing the tuning knob for 2 seconds the tuning step will be 100KHz in the RIT mode will be 10Hz and 100Hz If STEP changed in MEM mode then it will automatically change to VFO mode T...