Operating
Power switch and Gain
This swith is at left side, counter clockwise tuning to the end to shut off the power, clockwise turning to power
it on, GAIN up to the end.
Tune/Step
Change frequency in VFO mode, change memory location in Memory mode.
V/M/SAV
Click this button to alternate between Memory mode(MEM)and VFO mode, the LCD screen will show the “M-*”
or “V-*” (* The figures for 0-9). In Memory Mode the Tuning knob is used to change memory locations. In
VFO Mode the Tuning knob is used to change the frequency.
Press the V/M/SAV button for 2 seconds (the LCD screen will display SAV), the current frequency
and current mode will be stored in the Memory Location selected.
RIT/MOD button
Click this button to enter or exit RIT function. “R-” will be displayed to the middle of the frequency display.
When in the RIT mode, turning the tuning knob clockwise will raise the frequency (as indicated by the up
arrow). turning the tuning knob counter-clockwise will lower the frequency (as indicated by the down arrow).
Press and hold the RIT/MOD for 2 seconds. This will allow you to change the Keyer speed. Current keyer
speed will show on LCD, turning the TUNE/STEP to adjust. Press and hold the RIT/MOD for 2 seconds for
each change.